产品别名 |
屠宰场污水设备,工业废水设备,药厂医院污水设备 |
面向地区 |
品牌 |
天通 |
|
规格 |
其它 |
加工定制 |
是 |
Anhui wuhu slaughter wastewater treatment engineering case
A project summary
Project name: anhui wuhu slaughter wastewater treatment engineering
Engineering properties: slaughter wastewater treatment engineering
Project scope: sewage treatment station within 1 meter all content, including the supply of equipment, debugging.
Ii emission standards:
After the equipment processing water quality standards in the following table shows the integrated wastewater discharge standard GB8978-2002 level of emissions standards:
project
CODCR/(mg/L)
BOD5 / (mg/L)
SS/(mg/L)
Into the water
Water yield
1500-1500.
60 or less
500-500.
10 or less
200-200.
10 or less
Three requirements:
(1) processing technology is advanced, economic security and reliability of the operation of the system.
(2) the processing facilities, high efficiency, energy saving, management, operation, convenient maintenance and can run normally for a long time.
(3) reasonable, compact structure and equipment layout to cover an area of an area small, the beauty is generous.
(4) party b guarantee: supplied equipment and supporting materials are brand new, complete, and the latest design, to achieve quality standards and meet the safety requirements.
Four equipment name, specification model, the measuring unit, quantity
The equipment list
The serial number
The name of the
model
The number of
note
1
Hydrolysis acidification pool
JMXTJ - 1.5 * 2.0 * 2.0
1,
The integration of structure
Contact oxidation pool
JMXTH - 2.0 * 2.0 * 2.0
3,
Efficient settling basin
JMXCD - 0.5 * 2.0 * 2.0
1,
2
Dissolved air floating machine
RH = 5
L * B * H = 4000 * 2000 * 2000
1
Including air compressor
Container pump
Slag scraper
3
Adjust the pool lift pump
Wq10 50-110-0.75
Two (2)
4
blower
Vortex blower
1
5
Hydrolysis acidification pool packing
Three-dimensional elastic filler phi 200 x 1500
6 m after
6
Hydrolysis acidification pool packing stents
non-standard
2 sets of
7
Contact oxidation pool packing
combination
16 m after
8
Aeration aeration device
Microporous aeration
2 sets of
9
Contact oxidation pool packing stents
non-standard
4 sets of
10
The second pond water device
DPCS - 2-150.
1 set of
11
The second pond sludge pump
50 wq15-15-1.5
1
12
Inclined plate packing
With stents
2 m after
13
Electric control system
Electric control cabinet, cable
1 set of
14
Air flotation machines dosing barrels
1.5 * 0.75 * 0.75
15
Stir in medicine
0.75 kW
2
16
Steel tubes and other auxiliary materials
One batch
Five quality assurance
1 the seller guarantees that the equipment is new, at the time of delivery is no defects in material or workmanship and conforms to the technical standards and specifications the buyer;
2 the seller shall guarantee that the sale of the equipment department to provide proper and normal use, and after installation, right under the premise of normal operation and maintenance, during the service life of equipment is in good working order;
3 equipment materials and parts shall meet or exceed the buyer's technical standards and specifications.
Six equipment installation commissioning acceptance
1 after the equipment delivery, the seller shall have the installation conditions at the scene of the buyer's notification, or a shorter period of time in a week to send technical personnel to install, installation and debugging and within the prescribed time to complete, at the same time the seller is responsible for the installation and debugging process all damaged parts free replacement due to quality defects.
2 equipment in the installation and debugging operation under the guidance of the seller, the buyer and the seller together with equipment installation commissioning acceptance, if the seller does not participate in the joint inspection, are regarded as agree to the buyer's acceptance of the results. After the acceptance of equipment by the installation and debugging, signed by both parties the equipment installation and debugging acceptance conclusion form.
3 by the seller to be responsible for guiding installation, debugging and is responsible for the instruction, only after installation and debugging and technical performance meet technical requirements after the technology described in the contract, the buyer can accept all goods.
Jining day machinery equipment co., LTD., is a leading domestic water treatment equipment r&d, manufacturing and sales in one of the manufacturers, its core products: industrial waste water, river water, cotton textile factory sewage equipment, heavy industrial wastewater, sewage equipment, food industry wastewater, slaughterhouse wastewater equipment, pharmaceutical factory hospital sewage and industry wastewater treatment equipment.
济宁天通机械设备有限公司，是国内的水处理设备集研发、生产制造及销售于一体的生产厂家，其核心产品以：工业废水设备、河道污水设备、棉厂纺织厂污水设备、轻重工业污水设备、生活污水设备、食品行业污水设备、屠宰场污水设备、药厂医院污水设备等多行业污水处理。
