>水处理设备>污水处理成套设备>西藏环保水处理医院污水处理地埋.. 免费发布污水处理成套设备信息
广告
热门浏览

西藏环保水处理医院污水处理地埋式质量保障

更新时间:2019-05-04 08:52:01 信息编号:149590917
西藏环保水处理医院污水处理地埋式质量保障
100≥ 1台
  • 100.00 元

  • 天通

  • 定制

  • 生活水处理设备,水处理设备,水处理,医院污水处理

13355105763

2994839812

分享

详情介绍

产品别名
生活水处理设备,水处理设备,水处理,医院污水处理
面向地区
品牌
天通
规格
定制
加工定制

西藏环保水处理医院污水处理地埋式质量保障

西藏林芝医院污水处理

11化氯发生器

产品说明

      11化氯发生器是一种操作简单、高转化率、高纯度、多用途、环保型化学法中、小型二11化氯多级发生器。这种二11化氯发生器,是由釜式反应器通过耐酸导管和水 射式真空机组组成。釜式反应器采用的是两级或多级反应器,主反应釜内设有空气分布器,副反应釜设置了平衡管,使反应更,反应后的残液可达标排放。生成 的二11化氯制得水溶液,也可以制得稳定二11化氯溶液。做为一种新型的氧化剂和消毒剂,二11化氯以其、广谱、无残留、无副产物的消毒能力和脱色、除臭、 除异味等强氧化能力已经成为水处理领域的。和紫外线、臭氧、次111钠、液氯等传统的消毒剂相比二11化氯有着特的优势,它越来越成为业内人士的 选择。

系统组成

      化学法二11化氯发生器,由供料系统、反应系统、安全系统、自动控制系统和吸收投加系组成。

性能特点

A、工艺可以采用负压曝气、正压注入技术来生产二11化氯消毒液

B、设备的核心反应器采用耐高温耐腐蚀的复合材料制做,设备使用寿命长。反应器设计为多级塔式结构分级加热,主反应器的反应温度高达70℃,即了CLO2 的高含量,又提高了原料的转化率。

C、自动控制系统具有欠压、缺料、超温、缺水等自动报警和保护功能(自动停机)

D、原料输送采用德国、日本、美国、意大利等进口的计量泵,运行稳定可靠。

E、设备的自动控制系统功能强大,LED显示屏可动态显示设备运行的各种工艺参数(温度、压力、液位、投加量、出水余二11化氯及进水流量等),并可进行手动和自动模式的相互切换。可接受4-20mA的标准出余二11化氯和进水流量信号,实现余二11化氯和进水流量的在线闭环控制。同时还可以通过通讯接口实现远传通讯功能。

应用范围

1、各种场合下的生活、饮用、自来水的消毒;

2、餐厅、宾馆、家庭、餐具卫生设施的灭菌消毒和空气环境消毒等。

3、食品、饮料厂、发酵工业的设备、管道、容器的终灭菌消毒。

4、乳品厂、屠宰场的管道、设施及环境的灭菌处理;

5、医院污水的灭菌消毒处理;

6、游泳池、工业循环水、浴池水的灭菌消毒;

7、医院、卫生、临床器械的消毒、灭菌、除臭的防霉处理;

8、家庭、宾馆、饭店、水果蔬菜、鱼肉等食品的保鲜及终淋洗消毒;

9、配置各种口腔消毒液、除臭剂及创口清洗液等。

10、废水回用中的灭菌及脱臭;

11、面粉与各种食品的漂白剂;

12、造纸、印染行业的漂白药剂;

13、电镀含氰废水的破氰处理、印染废水的脱色处理,工业徨冷却水的除藻灭菌处理。

施工安装

1)、发生器与配电装置宜分室放置,房间内应有AC220V交流电源

2)、发生器产生的氢气应排出室外,其关口应远离火源,操作间照明用安全防爆灯,室内应具有良好的通风设施。

3)、发生器有进水口接口,出消毒液接口,外接管路直径应与之一致,消毒液口需装一止回阀。

4)、进水管路可用铁管或塑料管,出药管路须用聚氯乙烯或ABS塑料管。

5)、发生器旁应有给水排水设施。

6)、注意设备接地保护等问题。设备间内应有排水设施。且设备间应设简单防腐地面。

7)、应有大于0.3Mpa的自来水水源。

注意事项

1、运行前设备内加入足够的清水,严禁空机运转;

2、计量泵停止供料,应使水射器继续工作一小时以上,使反应器内的二氧化氯气体充分抽空,以免发生气体从进水管溢出。

3、如动力水源突然停水,应立即关闭计量阀门。

4、盐酸为强酸,操作人员应戴防护手套,原料NaCLO2禁止与各种酸类物品存放在一起,并远离火源。

5、设备温控水箱应经常补水,以防损坏加热器,控制器设有保护装置,当水箱水位低于设定值时,控制柜上故障灯亮,应立即补水。

6、二氧化氯具有强氧化性,设备的软塑料管,易老化和密封不严,应定期检查更换。

7、定期清理反应器内的沉淀物,如发现反应**液位管液位显示超过正常界限,则说明沉淀物过多,应立即冲洗。并检查原料的质量。

8、在原料含有杂质的情况下易堵塞应注意清理疏通。

9、设备为水浴加热,当设备不用时,将加热水,反应液放掉,以防温度低于0度时结冰,损坏设备。若设备间歇使用,为防止加热水和反应液结冰,可保持温控箱持续工作。

公司简介:济宁天通水处理设备有限公司水处理设备有限公司以“科技、人才”的经营理念和“质量、诚信为本”的经营理念,服务于社会,回报于社会,做好环境保护工作。公司主要生产污水处理站、工业废水处理设备、水处理设施、水处理设备、环保水处理、废水处理站和各种工业废水处理设备。

联系电话:

联系人:范经理

Sewage treatment in Linzhi Hospital of Tibet

Two 1 oxygen 1 chlorine generator

Product description

Two 1 oxygen 1 chlorine generator is a kind of simple operation, high conversion rate, high purity, multi purpose, environmental protection chemical method, small two 1 oxygen 1 chlorinated multistage generator. The two 1 oxygen 1 chlorine generator is made up of a kettle type reactor by an acid resistant and a water ejection vacuum unit. The reactor is equipped with a two stage or multistage reactor. The main reactor is equipped with an air distributor. The auxiliary reactor is equipped with a balancing tube to make the reaction more thorough and the residual liquid after discharge can reach the standard discharge. The two 1 oxygen 1 chloride produced in the water solution can also be made to stabilize the two 1 oxygen and 1 chloride solution. As a new type of oxidant and disinfectant, two 1 oxygen 1 chlorine has been widely used in the field of water treatment because of its high efficiency, broad-spectrum, no residue, no disinfection of by-products, and strong oxidizing ability such as decolorization, deodorization and odor elimination. Compared with the traditional disinfectants, such as ultraviolet, ozone, secondary chlorine, 1 acid, 1 sodium and liquid chlorine, two 1 oxygen 1 chlorine has unique advantages, and it is becoming the first choice of the industry.

system composition

The chemical method two 1 oxygen 1 chlorine generator is composed of feeding system, reaction system, safety system, automatic control system and absorption and adding system.

Performance characteristics

A and process can be produced by negative pressure aeration and positive pressure injection to produce two 1 oxygen 1 chlorine disinfectant solution

B, the core reactor of the equipment is made of high temperature resistant and corrosion-resistant composite materials, and the service life of the equipment is long. The reactor is designed as multi-stage tower structure, and the heating temperature of the main reactor is as high as 70 degrees. That is to ensure the high content of CLO2 and the conversion rate of raw materials.

C, automatic control system has the function of automatic alarm and protection (automatic stop), such as undervoltage, lack of material, overtemperature, water shortage and so on.

D, raw materials are imported from Germany, Japan, the United States, Italy and other imported metering pumps, and the operation is stable and reliable.

The function of the automatic control system of E equipment, powerful LED display dynamic display of various parameters of equipment operation (temperature, pressure, liquid level, dosage, water more than 1 oxygen 1 chloride and water flow etc.), and can switch between manual and automatic mode. Acceptable 4-20mA standard 1 oxygen chloride and 1 more than the water flow signal, to achieve more than 1 of the chlorine and oxygen 1 on-line closed-loop water flow control. At the same time, the communication function can be realized through the communication interface.

Application scope

1. Disinfection of living, drinking and tap water on various occasions;

2. Sterilization and disinfection of restaurants, hotels, families, tableware sanitary facilities and air environment disinfection.

3, the final sterilization and disinfection of equipment, pipes and containers in food, beverage and fermentation industries.

4. Sterilization of pipelines, facilities and environment in dairy and slaughterhouses;

5. Disinfection and disinfection of hospital sewage;

6. Sterilization and disinfection of swimming pool, industrial circulating water and bath water.

7. Sterilization, sterilization and deodorization of hospitals, health and clinical instruments;

8, family, hotels, restaurants, fruits and vegetables, fish and other food preservation and final washing and disinfection;

9. All kinds of oral disinfectant, deodorant and wound cleaning liquid.

10. The sterilization and deodorization of the wastewater reuse.

11, the bleaching agent of flour and all kinds of food;

12, bleaching agents in papermaking and printing and dyeing industry;

13, decolorization treatment of electroplating wastewater containing cyanide cyanide treatment, dyeing wastewater treatment, sterilization and algae removal in addition to industrial cooling water loss.

Construction and installation

1), the generator and distribution device should be placed in the room. There should be AC220V AC power supply in the room.

2), the hydrogen generated by the generator should be discharged from the outside. The gateway should be far away from the fire source, and the operation room should be equipped with a safe and explosion-proof lamp, and the room should have good ventilation facilities.

3), the generator has the inlet port interface, the interface of the disinfectant, the diameter of the external pipe should be the same, the mouth of the disinfectant must be loaded with a check valve.

4) the inlet pipe may be used as an iron pipe or plastic pipe, and PVC or ABS plastic pipes must be used.

5) water supply and drainage facilities shall be due to the generator.

6), pay attention to equipment grounding protection and other problems. There should be drainage facilities within the equipment. And the equipment should be equipped with simple anticorrosion ground.

7), there should be a water source that is greater than 0.3Mpa.

Matters needing attention

1. Enough water must be added to the equipment before the first operation, and the operation of the air machine must be strictly prohibited.

2, the metering pump stops feeding, and the water ejector should continue to work for more than an hour, so that the chlorine dioxide gas in the reactor can be fully evacuated, so as not to cause gas to overflow from the water inlet pipe.

3, if the power source is suddenly shut down, the metering valve should be shut down immediately.

4, hydrochloric acid is strong acid, the operator should wear protective gloves, the raw material NaCLO2 is forbidden to be stored with all kinds of acid products and away from the fire source.

5, the equipment temperature control tank should be regularly replenishment, in order to prevent damage to the heater, and the controller has protective device. When the water level of the tank is below the set value, the fault lamp on the control cabinet is bright, and the water should be replenishment immediately.

6, chlorine dioxide has strong oxidation, the equipment of soft plastic tube, easy to aging and tight seal, should be regularly checked and replaced.

7. Clean up the sediment in the reactor regularly. If the level of the liquid level tube is found to be above the normal limit, it is indicated that the sediment is too much and should be washed immediately. And check the quality of the raw material.

8, in the case of impurities in the case of easily clogged, it should be paid attention to cleaning and dredging.

9, the equipment is heated by water bath. When the equipment is not used, the water will be heated and the reaction liquid is released to prevent the freezing and damage to the equipment when the temperature is less than 0 degrees. If the equipment is used intermittently, in order to prevent the heating water and the reaction liquid from freezing, the temperature control box can be maintained continuously.

Company introduction: Jining Tian Tong Shui treatment equipment Co., Ltd. water


网站地图

济宁天通机械设备有限公司 7年

  • 路面机械,钢筋机械,水处理设备,压路机
  • 山东济宁任城区唐口街道办事处

———— 认证资质 ————

个人认证已通过
企业认证已通过
天眼查未核实
手机认证已通过
微信认证已通过

相关推荐产品

留言板

  • 生活水处理设备水处理设备水处理医院污水处理
  • 价格商品详情商品参数其它
  • 提交留言即代表同意更多商家联系我
济宁天通机械设备有限公司为你提供的“西藏环保水处理医院污水处理地埋式质量保障”详细介绍,包括生活水处理设备价格、型号、图片、厂家等信息。如有需要,请拨打电话:13355105763。不是你想要的产品?点击发布采购需求,让供应商主动联系你。
“西藏环保水处理医院污水处理地埋式质量保障”信息由发布人自行提供,其真实性、合法性由发布人负责。交易汇款需谨慎,请注意调查核实。